Table of Contents
Advertisement
60
Operating
Standby mode
The speaker switches to the standby mode if there
is no music playback or no button operation.
Standby mode
Option 1.
If network is disconnected and there is no music
playback and no button operation for 20 minutes,
the speaker switches to the standby mode. Then
"GOOD BYE" appears on the display window and
the LED indicator on the unit turns red.
3
Option 2.
If you press and hold 1/! on the unit or 1 on the
remote control for about 3 seconds, the speaker
switches to the standby mode. Then "GOOD BYE"
appears on the display window and the LED
indicator on the unit turns red.
Network standby mode
Option 1.
When network is connected but music is not
played and buttons are not pressed for 20 minutes,
the speaker switches to the network standby
mode. Then the LED indicator on the unit becomes
dimmed in white.
Option 2.
If you press 1/! on the unit or 1 on the remote
control, the speaker switches to the network
standby mode. Then the LED indicator on the unit
becomes dimmed in white.
,
Note
On the Network Standby Mode, if you press
1/! button, the latest music playlist will be
played.
Bluetooth standby mode
If the Bluetooth standby mode is set to ON, the
speaker switches Bluetooth standby mode when is
turned off.
When you turn on the main unit in the Bluetooth
standby mode, Bluetooth and LG TV are able to
connect even if network is not connected.
,
Note
y Adjust volume level of the main unit to
minimum. And then, press and hold VOL -
and DRC on the remote control for about
3 seconds. The speaker switches Bluetooth
standby mode.
y If you turn off the unit in the Wi-Fi function,
Bluetooth standby mode does not operate.
y To use this function, you should turn on the
AUTO POWER function.
Reset the Speaker
If the speaker is not turned on or doesn't respond,
reset the speaker.
Resetting the speaker
y Press and hold the
the beep sound once. You can see "DISABLED"
on the display window. Then all wireless network
ports are deactivated and the stored wireless
network information is deleted.
y Press and hold the
the beep sound twice. You can see "RESET1" on
the display window. You can reset the speaker to
its original factory settings.
button until you hear
button until you hear
Advertisement
Table of Contents
