Toro 07059TC Operator's Manual page 39

Replacing the Air-Cleaner Element
Service Interval: Every 50 hours—Under special
operating conditions (refer
to Maintaining the Machine
under Special Operating
Conditions)—replace the air-cleaner
element. Replace the air-cleaner
element sooner if dirty or damaged.
Every 100 hours—Under normal operating
conditions—replace the air-cleaner element.
Replace the air-cleaner element sooner if dirty
or damaged.
Note:
Service the air-cleaner element more
frequently (every few hours) if operating conditions
are extremely dusty or sandy.
1. Gently slide the air-cleaner element out of the
air-cleaner body
Note:
Avoid knocking the air cleaner into the
side of the body.
Important:
Do not attempt to clean the
air-cleaner element.
2. Inspect the new element for damage by looking
into the element while shining a bright light on
the outside of the element.
Note:
Holes in the element appear as bright
spots. Inspect the element for tears, an oily film,
or damage to the rubber seal. If the element is
damaged, do not use it.
3. Carefully slide the element into the air-cleaner
body.
Important:
Do not press on the soft inside
area of the element.
4. Install the air-cleaner cover with the side
indicated as UP facing upward and secure the
latches (Figure 39).
(Figure 39).
39
Figure 39
g034313