Table of Contents
Advertisement
Pre-Maintenance
Procedures
Preparing the Machine for
Maintenance
1.
Park the machine on a level surface.
2.
Shift the transmission to the N
3.
Engage the parking brake.
4.
Shut off the engine and remove the key.
5.
Empty and raise the cargo bed.
Lifting the Machine
The machine may be unstable when using
a jack. The machine could slip off the jack,
injuring anyone beneath it.
• Do not start the machine while the machine
position.
EUTRAL
• Always remove the key from the key switch
• Block the tires when the machine is
• Use jack stands to support the machine
Important:
routine maintenance and/or diagnostics, ensure
that the rear wheels of the machine are 25 mm (1
inch) off the ground, with the rear axle supported
on jack stands.
•
•
32
DANGER
is on a jack.
before getting off the machine.
supported by lifting equipment.
once you have lifted it.
Whenever you run the machine for
The lifting point at the front of the machine is
located at the front of the frame, behind the towing
tongue
(Figure
23).
Figure 23
1. Front lifting point
The lifting point at the rear of the machine is
located under the axle tubes
g034043
(Figure
24).
Advertisement
Table of Contents
