Using The Control Panel; Checking Ink Levels - Epson ET-2600 Quick Manual

Using the Control Panel

The control panel makes it easy to use many of your product's features.
Clear a network error. Press for 3 seconds
to connect to a network using WPS.
You may see the following lights turn on or flash on the control panel:
The left light turns solid green when the product is connected to a wireless
network or flashes when the product is communicating with the wireless
network. The right light flashes orange if there is a problem with the product's
wireless connection.
Indicates the status of the initial ink charge.
Turns on or flashes when paper is out or a paper jam occurs.

Checking Ink Levels

You can visually check the ink levels in the product's ink tanks. Make sure the ink levels are
above the lower ink refill lines on the ink tanks. If ink levels fall below these lines, see the
online User's Guide for refilling instructions.
Caution: Perform regular visual inspections of the ink tanks to ensure ink levels do not
fall below the lower line. Prolonged use of the product when the ink level is below the
lower line on the tank could damage the product.
2
Using the Control Panel
Turn on Print a network
or off status sheet
Stop current
operation
Start monochrome or color copy. Press both
simultaneously to scan to a computer.