Solving Network Problems; Declaration Of Conformity - Epson ET-2600 Quick Manual

Solving Network Problems

If you have a network problem with your Epson
panel to diagnose the cause of most problems.
You can also check the basic troubleshooting suggestions below. For more in-depth
troubleshooting, see your online User's Guide or FAQs at www.epson.com/support (U.S.)
or www.epson.ca/support (Canada).
■
If you are connecting the product via Wi-Fi Protected Setup (WPS) and the WiFi
light on your product is not solid green, make sure you press the
product within 2 minutes of pressing the WPS button on your router. Hold down the
button on the product for 3 seconds.
Wi-Fi
■
Try connecting to the wireless router or access point with your computer or another
device to confirm that it is working correctly.
■
Try restarting the router (turn it off and then on), then try to connect to it again.
■
Verify that the network settings are correct and check the signal strength. If it is poor,
try moving the product closer to your router or access point.
■
When using TCP/IP, make sure your network's DHCP option is enabled (your router
manufacturer will be able to assist you with this setting).
■
Print a network status sheet from the product's control panel by pressing
■
Remove and reinstall your product software.
Notices

Declaration of Conformity

According to 47CFR, Part 2 and 15 for: Class B Personal Computers and Peripherals; and/or CPU
Boards and Power Supplies used with Class B Personal Computers:
We:
Located at:
Telephone:
Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and
15 of the FCC rules as a Class B digital device. Each product marketed is identical to the
representative unit tested and found to be compliant with the standards. Records maintained
continue to reflect the equipment being produced can be expected to be within the variation
accepted, due to quantity production and testing on a statistical basis as required by 47CFR §2.909.
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
4
Solving Network Problems
Epson America, Inc.
3840 Kilroy Airport Way, MS 3-13, Long Beach, CA 90806
(562) 981-3840
®
product, check the lights on the control
button on the
Wi-Fi
.