Siemens 6ES7515-2AN03-0AB0 Manual page 36

Interrupts, error messages, diagnostics and system alarms
5.1 Status and error display of the CPU
RUN/STOP LED
LED flashes
yellow/green
Meaning of LINK RX/TX LED
Each port has a LINK RX/TX LED. The table below shows the various "LED scenarios" of the
CPU 1515‑2 PN ports.
Table 5-2 Meaning of the LED
LINK TX/RX LED
LED off
LED flashes green
LED lit green
LED flashes
yellow/green
NOTE
"LED" instruction
You can read the status (e.g. "On" or "Off") of LEDs of a CPU or a module using the "LED"
instruction. Note, however, that it is not possible to read the LED status of the LINK RX/TX
LEDs on all S7-1500 CPUs.
You can find additional information on the "LED" instruction in the STEP 7 online help.
36
ERROR LED
LED flashes red LED flashes yellow
There is no Ethernet connection between the PROFINET interface of the PROFINET device and
the communication partner.
No data is currently being sent/received via the PROFINET interface.
There is no LINK connection.
The CPU is performing an "LED flash test".
There is an Ethernet connection between the PROFINET interface of your PROFINET device and
a communication partner.
Data is currently being received/sent by a communication partner in the Ethernet via the
PROFINET interface of the PROFINET device.
MAINT LED
Startup (CPU booting)
Test of LEDs during startup, inserting a module.
LED flashing test
Meaning
Meaning
CPU 1515-2 PN (6ES7515-2AN03-0AB0)
Equipment Manual, 11/2022, A5E46416198-AC