Transport And Storage - Husqvarna 970 49 46-04 Operator's Manual

Transport and storage

• Secure the equipment during transportation in order
to avoid transport damage and accidents.
• The machine should be transported under cover
where possible, limiting the exposed to natural
elements – in particular rain and snow.
• Store the equipment in a lockable area so that it is out
of reach of children and unauthorized persons.
• The machine should always be stored in a dry place
when not in use.
Transport
The machine can be taken apart and folded to give a
smaller size when transporting.
• Disconnect the motor cable from the electrical box.
• Loosen the nuts a few turns to release any pressure,
pull out the locking pins and remove the bolts on each
side.
• Loosen the grinding head from the wheel chassis.
OPERATING
1
3
2
• Put the machine in inclined transport position. Loosen
the locking knobs on the support foot.
• Fold forward the support foot.
• Hold down the handle on the angle joint while
simultaneously angling the upper part of the frame
carefully forward.
2
• Fold up the machine carefully.
1
English
–
17