Compact 4-way Type
Display when stopping the swing
Fan / Heat
Cool / Dry
operation
operation
Unit select button
• When multiple indoor units are controlled with one
remote controller, louver direction can be set for
each indoor unit by selecting individually.
• To set louver direction individually, push
button to display an indoor unit number in the control
group. Then set the wind direction of the displayed
indoor unit.
• When no indoor unit number is displayed, all indoor
units in the control group can be controlled
simultaneously.
• Each time
button is pushed, the display
changes as follows:
UNIT No.
UNIT No.
UNIT No.
1-1
1-2
1-3
Not
UNIT No.
display
1-4
17-EN
Owner's Manual
Compact 4-way Type
– 9 –
7
Power Saving Mode
The power saving mode saves energy by limiting the maximum current which will effect heating or cooling capacity that the unit
can generate.
Push
button during operation.
• The air conditioner enters power saving mode.
•
appears on the display.
Power saving mode will stay in effect until it is cancelled.
To cancel the power saving mode, push
•
disappears.
To configure the power saving mode settings
When RAV-SP***2AT / RAV-SM***3AT or older is used, the displayed setting changes, but the actual power level is always "75
%".
1
Push
•
, symbol, and numbers flash.
2
Push
• Each time the button is pushed, UNIT No. change as follows:
The fan of the selected unit runs.
button again.
2
4
5
button for at least four seconds when the air conditioner is not working.
(left side of the button) to select an indoor unit to be set.
UNIT No.
UNIT No.
UNIT No.
1-1
1-2
UNIT No.
1-4
Owner's Manual
1
3
1-3
18-EN