How To Utilize This Installation Procedure; Descriptions Used In This Procedure; When Using The Contained Parts; Carton) - Canon Staple Finisher-R1 Service Manual

How to Utilize This Installation Procedure

Descriptions Used in This Procedure

In this procedure, the machine connected to the finisher is called the host machine.
When Using the Contained Parts (Bundled Components
in the Shipping Carton)
After unpacking, confirm the parts contained in the package.
The below symbol appears on the illustration of some steps when the parts contained in
the shipping carton are to be used. Mind this symbol to be aware the parts contained in the
shipping carton are to be used.
6
How to Utilize This Installation Procedure
F-6-1
6 How to Utilize This Installation Procedure

Symbols in the Illustration

The frequently-performed operations/works are described with symbols in this procedure.
Check the description below.
Screw Connector
Tighten Remove Connect
Prohibition Checking
(Good/Bad) instruction
Good Bad Check
Instruction on direction
(front/rear, top/bottom)
Push Connect to Turn ON
the outlet the switch
Remove the Fit in the Release/
projection projection remove
the claw
Harness
Disconnect Connect/ Disconnect/
Secure Free
Visual Sound
check check
Copy
Fit in/attach
the claw
F-6-2
6-2
6-2