Water; Preparing Frothy Milk For Coffee - Beko 01M-8818611200-5320-01 Instructions Manual

5
Operation
5.4 Adjusting The Volume of Your Coffee/Hot Water
You can save your desired volume of coffee for both strong espresso and mild espresso and also the hot
water from 25ml to 250ml.
When making your coffee (either strong
espresso or mild espresso) press and
hold the button you selected. The app-
liance will continue to make the cup of
coffee while holding on the button.

5.5 Preparing Frothy Milk for Coffee

As the temperature of steam is higher than the temperature of espresso, the espresso should
be prepared before making frothy milk. Otherwise the espresso might get burnt.
Prepare the espresso coffee with a lar-
ger cup. Turn the steam nozzle toward to
the Drip tray.
Fully Automatic Coffee Machine / User Manual
2x
beep!
When the volume of coffee meets your
desired volume, release the button. If
you hear two beeps, that indicates the
machine has saved the volume of coffee
that you prefer.
Press the steam button. The steam indi-
cator light will flash. Then the appliance
will heat up and drain the residual water
into the Drip Tray or another container.
After the steam indicator light stops
flashing and stays steady, place a con-
tainer with milk under the steam nozz-
le and immerse the steam nozzle abo-
ut 5cm deep into the container. Swivel
the container while the hot steam co-
mes out.
Pour the hot frothy milk into the espres-
so. Now you can enjoy your coffee!
39 / EN