Queue - D-Link DSL-2750U User Manual

DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual

Queue

On the Net / QoS / Queue page, you can specify the maximum data transfer rate for each queue.
You can specify the following parameters:
Parameter
Default queue
Queue
Shaping
After specifying the needed parameters, click the Save button.
Figure 78. The Net / QoS / Queue page.
From the drop-down list, select a queue through which unfiltered
traffic will be forwarded out. By default, the value 4 is specified.
Queue setting
A queue number. The lower the value, the higher is the queue
priority.
The maximum data transfer rate (Kbit/s). Select a field in the
relevant line of the table and specify the needed value. If the
maximum data transfer rate is not specified for a queue, traffic of
this queue will have higher priority than traffic of a queue for which
the maximum data transfer rate is specified.
Page 100 of 181
Configuring via Web-based Interface
Description