Ftp - D-Link DSL-2750U User Manual
Wireless adsl2+ router with 3g/lte/ethernet wan support and usb port
Hide thumbs
Also See for DSL-2750U:
- User manual (210 pages) ,
- Quick installation manual (42 pages) ,
- Technical support setup procedure (19 pages)
Table of Contents
Advertisement
DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
FTP
On the USB storage / FTP page, you can enable the built-in FTP server of the router to provide
access to the USB storage for users of your LAN.
You can enable the FTP server only when a USB storage is connected to the router (in this case, the
Connected value is displayed in the USB storage field). Select the Enable checkbox; if
needed, change the router's port used by the FTP server in the Port field (by default, the standard
port 21 is specified). Then click the Apply button.
To allow access to the content of the USB storage for users of your LAN, proceed to the System /
USB users page and create needed accounts.
To disable the built-in FTP server of the router, deselect the Enable checkbox and click the Apply
button.
Figure 115. The USB storage / FTP page.
Page 149 of 181
Configuring via Web-based Interface
Advertisement
Table of Contents
