Automatic Programmes; Using The Accessories - AEG BPE742320M User Manual

18 www.aeg.com
5. Press any symbol to stop the signal.
7.3 Heat + Hold
Conditions for the function:
• The set temperature is more than
80 °C.
• The function: Duration is set.
The function: Heat + Hold keeps
prepared food warm at 80 °C for 30
minutes. It turns on after the baking or
roasting procedure ends.
You can turn on or turn off the function in
the menu: Basic Settings.
1. Turn on the oven.
2. Select the heating function.
3. Set the temperature above 80 °C.
4. Press
display shows: Heat + Hold.
5. Press

8. AUTOMATIC PROGRAMMES

WARNING!
Refer to Safety chapters.
8.1 Recipes online
You can find the recipes for the
automatic programmes on our website.
To find the Recipe Book check the PNC
number on the rating plate on the front
frame of the oven cavity.
8.2 Recipes with Recipe
Automatic
This oven has a set of recipes you can
use. The recipes are fixed and you
cannot change them.

9. USING THE ACCESSORIES

WARNING!
Refer to Safety chapters.
9.1 Food Sensor
Food sensor measures temperature
inside the food. When the food is at the
set temperature, the oven turns off.
There are two temperatures to be set:
again and again until the
to confirm.
When the function ends, a signal sounds.
7.4 Time Extension
The function: Time Extension makes the
heating function continue after the end of
Duration.
Applicable to all heating
functions with Duration or
Weight Automatic.
Not applicable to heating
functions with the food
sensor.
1. When the cooking time ends, a signal
sounds. Press any symbol.
The display shows the message.
2. Press to turn on or
3. Set the length of the function.
4. Press .
1. Turn on the oven.
2. Select the menu: Recipes. Press
to confirm.
3. Select the category and dish. Press
to confirm.
4. Select a recipe. Press
• the oven temperature (minimum
120 °C),
• the food core temperature.
CAUTION!
Use only the food sensor
supplied and the original
replacement parts.
For the best cooking results:
to cancel.
to confirm.