Table of Contents
Advertisement
EZ Mode
EZ Mode
The EZ Mode screen is the first thing you will see when you start ESP. EZ Mode will help
you get your imager up and running quickly, and will acquaint you with the ESP interface.
2-2
The purpose of Dot Peen Enhanced in Illumination Quick Setup
is to optimize settings for typical dot peen marks. Dot Peen
Enhanced causes the imager to run a two step illumination
sequence (Low Angle and then Red Dome) and matches the
morphological operator (Grow Dark and Grow Light) to the
expected dot peen response. The size of the morphological
operator is selectable (Small, Medium, or Large). These settings
can also be controlled by programming symbols (see
Enhanced Illumination
Click Start to upload the most recent image
acquired before releasing the trigger. When an
image is captured, it is displayed here. Click Save
Image to save it to a location of your choice. Good
read images show a green border around the symbol.
If you hover your cursor over the symbol, you will
see the illumination, gain, and resolution settings
that were used in capturing the image. Symbol data
is displayed in the area under the Save Image button.
Settings).
SIMATIC MV340 User's Manual
Dot Peen
Advertisement
Chapters
Table of Contents
