I/O Parameters by ESP
I/O Parameters by ESP
To make changes to configuration settings in the I/O Parameters tree control:
1. Left click on the
2. Double click on the parameter
and click once in the selection box
to view options.
3. Place your cursor in the selection
box, scroll down to the setting you
want to change and click once on
the setting.
7-2
+
to expand the tree.
4. Left click again on the
open screen to complete
the selection.
5. Right click on the open
screen and select Save to
Reader to implement the
command in the imager.
SIMATIC MV340 User's Manual