Table of Contents
Advertisement
Operation
Turning On
^ If closed, open the water supply.
^ Press and hold the s button .
The activating time for the s button
can be set to a maximum of 10
seconds (see "System functions -
On/Off button activation time" in the
Programming Manual).
^ The last selected program is shown
in the program overview on operating
level A, B, and D and operating
instructions for the
unit recognition
operating level C.
If the washer is not in use, the
display automatically switches off
after approx. 10 min.
To turn the display back on, touch
any button.
Reset button
If the Profitronic no longer responds to
the keys it can be restarted with the
Reset button.
The Reset button is located at the
underside of the electronic control. To
activate it:
^ Pull out the DOS drawer.
^ Push the Reset button.
The Profitronic is shut down and
restarted.
44
Automatic mobile
are displayed in
Starting a program
You can find detailed and important
information regarding the Miele
default programs in the Program
charts in the Appendix of the
Programming Manual.
,
Any program or dosing changes
in connection with the preparation of
medical devices must be
documented (under the German
Medical Device Operator
Ordinance). In such cases, the lab
washer results (cleaning,
disinfection) will need to be
re-validated.
Operating levels A and B
A list of all selectable programs
appears in the display.
^ Select the desired program with - e,
confirm with OK.
^ Press the h start button.
The program begins.
Operating level D
^ Select the menu item
overview
, confirm with OK.
^ Select the desired program with - e,
confirm with OK.
^ Press the h start button.
The program begins.
Program
Advertisement
Table of Contents
