Advertisement
INSTALLATION
16
moisture remains, the anti-slip sheets may
will not stick.
2
Adjust the level after placing the appliance in
the installation area.
3
Place the adhesive side
sheets on the floor.
4
Put the appliance on the anti-slip sheets.
• Do not attach the adhesive
sheets to the feet of the appliance.
5
Recheck the appliance's levelness.
• Push or rock the edges of the appliance
gently to make sure that the appliance does
not rock. If the appliance rocks, level the
appliance again.
NOTE
• The pads may leave a sticky residue when they
are removed. The residue can be removed with
rubbing alcohol.
Assembling the drip tray
Before using the appliance, insert the drip tray
onto the bottom of the cabinet.
1
Hold the tray so the arrow and letter on the
front of the tray face up.
of the anti-slip
a
of anti-slip
a
2
Insert one side of the tray first, then the other.
Push the tray until it slides completely in.
3
To detach, pull one side out then the other.
• If the tray collects water, detach it and empty
the water. After emptying it, reassemble the
tray.
CAUTION
• Do not operate the appliance without installing
the drip tray. Doing so could lead to water
damage caused by leaking.
Installing hinge covers
1
Open the appliance door.
2
Snap the hinge cover onto the upper hinge
assembly with the bent edge on the far side
from the hinge.
3
Repeat with the remaining hinge cover on the
lower hinge assembly.
Advertisement
