Advertisement
• The Wi-Fi connection may not connect or may be
interrupted because of the home network
environment.
• The network connection may not work properly
depending on the Internet service provider.
• The surrounding wireless environment can
make the wireless network service run slowly.
• The appliance cannot be registered due to
problems with the wireless signal transmission.
Unplug the appliance and wait about a minute
before trying again.
• If the firewall on your wireless router is enabled,
disable the firewall or add an exception to it.
• The wireless network name (SSID) should be a
combination of English letters and numbers. (Do
not use special characters.)
• Smartphone user interface (UI) may vary
depending on the mobile operating system (OS)
and the manufacturer.
• If the security protocol of the router is set to
WEP, you may fail to set up the network. Please
change it to other security protocols (WPA2 is
recommended) and register the product again.
Installing the LG ThinQ
Application
Search for the LG ThinQ application from the
Google Play Store or Apple App Store on a
smartphone. Follow instructions to download and
install the application.
Using the Appliance Remotely
Remote Control
Use a smartphone to control your appliance
remotely. You can also monitor your programme
operation so you know how much time is left in the
programme.
Using this function
1
Put the clothes into the appliance.
2
Touch the Power button.
SMART FUNCTIONS
3
Touch and hold the Gentle Dry button for 3
seconds to enable the remote control function.
4
Start a programme from the LG ThinQ
application on your smartphone.
NOTE
• Once this function is enabled, you can only start
a programme from the LG ThinQ smartphone
application. If the programme is not started, the
appliance will wait to start the programme until
it is turned off remotely from the application or
this function is disabled.
• If the door has been opened, you can not start a
programme remotely.
Disable this function manually
When the function is activated, press and hold the
Gentle Dry button for 3 seconds.
Download programme
Download new and special cycles that are not
included in the basic cycles on the appliance.
Appliances that have been successfully registered
can download a variety of specialty cycles specific
to the appliance.
Once cycle download is completed in the appliance,
the appliance keeps the downloaded cycle until a
new cycle is downloaded.
To operate a downloaded programme on the
appliance, touch the Refresh button on the
appliance repeatedly until the Downloaded setting
is lit up.
NOTE
• Only one downloaded programme can be stored
on the appliance at a time.
RF Radiation Exposure
Statement
This equipment shall be installed and used at a
minimum distance of 20 cm from the human body.
37
Advertisement
