Panasonic KX-TVM50 Installation Manual page 159

such as modem extensions.
Example: FTXD [hookswitch flash
• Reconnect Sequence on Busy
Tells the VPS how to return to the caller if the called extension is busy. PBXs differ in how they
handle this function. Test from an SLT to determine the sequence.
• Reconnect Sequence on No Answer
Tells the VPS how to return to the caller if the called extension does not answer. PBXs differ in
how they handle this function. Test from an SLT to determine the sequence.
• Reconnect Sequence on Refused Call
Tells the VPS how to return to the caller if the called extension's owner has enabled Call
Screening to not take the call. PBXs differ in how they handle this function. Test from an SLT to
determine the sequence.
• Light-On Sequence for Message Waiting Lamp
This is the dialling sequence that the VPS must use to turn on a message waiting lamp at an
extension.
• Light-Off Sequence for Message Waiting Lamp
This is the dialling sequence that the VPS must use to turn off a message waiting lamp at an
extension.
• Message Waiting Lamp Retry Time
Specifies the number of times to retry the Message Waiting Lamp light-on/light-off process. This
parameter is enabled only when the integration mode is Inband Integration or No Integration.
• Message Waiting Lamp Interval Time
Specifies the time between retries for the Message Waiting Lamp light-on/light-off process. This
parameter is enabled only when the integration mode is Inband Integration or No Integration.
• Call Waiting Sequence
This sequence is carried out by the VPS to perform call waiting when the called extension is busy.
PBXs differ in how they handle this function. Test from an SLT to determine the sequence.
• Release Sequence for Call Waiting
This sequence is carried out by the VPS to release call waiting. PBXs differ in how they handle
this function. Test from an SLT to determine the sequence.
5.2 PBX Settings for Inband Integration
dial tone dial extn. hang up]
Installation Manual 159