Siemens SITRANS P320 Compact Operating Instructions page 80

Technical data
8.4 Construction
Construction for gauge pressure, with flush mounted diaphragm
Process connection
Electrical connection
Han 8D is identical to Han 8U.
1)
Construction for gauge pressure and absolute pressure (from the differential pressure series), differential pressure and
flow rate
Weight
Material
• Wetted parts materials
Seal diaphragm
Pressure caps and vents
O-ring
• Non-wetted parts materials
Electronics housing
Pressure cap screws
Mounting bracket
Process connection
Electrical connection
Han 8D is identical to Han 8U.
1)
80
• Flanges as per EN and ASME
• F&B and Pharma flange
• BioConnect/BioControl
• PMC style
Cable inlet using the following screwed joints:
• M20x1.5
• ½-14 NPTM
• Han 7D/Han 8D connector
• M12 connector
Approx. 3.9 kg (8.5 lb) with aluminum enclosure
Approx. 5.9 kg (13 lb) with stainless steel enclosure
Stainless steel, mat. no. 1.4404/316L, Alloy C276, mat. no. 2.4819, Monel 400, mat.
no. 2.4360, tantalum or gold
Stainless steel, mat. no. 1.4408 to MAWP 160 bar, mat. no. 1.4571/316Ti for
MAWP 420 bar, Alloy C22, 2.4602 or Monel 400, mat. no. 2.4360
FKM (Viton) or optionally: PTFE, FEP, FEPM and NBR
• Low-copper die-cast aluminum GD‑AlSi 12 or stainless steel precision casting, mat.
no. 1.4409/CF-3M
• Standard: Powder coating with polyurethane
D20 option: 2 coats: Coat 1: epoxy-based; coat 2: Polyurethane
• Stainless steel nameplate (1.4404/316L)
Stainless steel ISO 3506-1 A4-70
Steel, galvanized, stainless steel 1.4301/304, stainless steel 1.4404/316L
/ ‑18 NPT female thread and flange connection with
1
4
accordance with EN 61518 or M10 mounting thread in accordance with DIN 19213
(M12 for MAWP 420 bar (6092 psi)
Screw terminals
Cable inlet using the following screwed joints:
• M20 x 1.5
• ½-14 NPT
• Han 7D/Han 8D connector
• M12 connector
1)
/
7
16
1)
Compact Operating Instructions, 09/2021, A5E38874562-AD
-20 UNF mounting thread in
SITRANS P320/P420