Operation Via The App; Technical Requirements; Downloading App; Connecting The App - Bosch Climate Class 6000i Operation Manual

Pos. Symbol Function
5 Transmission Symbol
Symbol for the Multi-Space mode
6 – Set temperature
7 Battery status
Table 5 Symbols in the display of the remote control
3.3

Operation via the app

Control the most important functions of the indoor unit very easily via
the Bosch HomeCom Easy app on your smartphone.
You can continue using the remote control of your indoor unit.
3.3.1

Technical requirements

Operating system
Router
WLAN standard
Table 6
3.3.2

Downloading app

The app can be downloaded from the Apple App Store for iOS and also
the Google Play Store for Android. To benefit from the latest function and
security updates, make sure you always have the latest version installed
on your smartphone.
▶ Scan QR code ( Fig. 9).
▶ Bosch HomeCom Easy Downloading the app.
3.3.3

Connecting the app

Prerequisite:
• The WLAN signal strength is sufficient to establish a connection with
the Internet. If the signal is too weak use a WLAN repeater.
▶ Bosch HomeCom Easy Start the app ( Fig. 10).
The first time you use the app it guides you step-by-step through the
connection process.
3.4

Replace or insert batteries

Use 2 AAA (R03) size batteries. Using rechargeable batteries is not
recommended.
The battery life is approximately 1 year under normal use. Replace the
batteries when the remote control displays
▶ Remove the battery cover ( Fig. 1).
▶ Insert the batteries, making sure the polarities are correctly aligned.
The display indicates "AM 6:00" when the batteries are properly
inserted.
▶ Reinstall the cover.
NOTICE
▶ When replacing the batteries, always change both and use the same
type.
▶ If you will not be using the unit for a long time, remove the batteries
from the remote control.
3.5

Setting the current time

There are two clock modes: 12-hour mode and 24-hour mode.
▶ To set the 12-hour mode, press the Clock button once.
-or-
▶ To set the 24-hour mode, press the Clock button twice.
▶ Press the . or / button to set the current time. Hold down the
button to advance or reverse the time quickly.
▶ Press the Set/C button.
The colon (:) on the display blinks.
Climate Class 6000i/8000i – 6721831490 (2020/11)
• Android
• IOS
Standard router with 2.4 GHz
signal
IEEE 802.11b/g/n
.
The current time cannot be set when the timer is set. To set the time the
timer must be cancelled.
3.6

Using the remote control

The signal range is 7 m. If objects are in the way or certain fluorescent
lamps are used in the same room this can affect transmission of the
signal.
▶ Point the remote control towards the signal receiver window of the
unit and press the desired key.
The unit emits a beep when it receives a signal.
NOTICE
The remote control may be permanently prevented from working
correctly.
▶ Do not expose the remote control to direct sunlight.
▶ Do not leave the remote control near a heating appliance.
▶ Protect the remote control from moisture and impacts.
3.7

Setting main operating mode

Switching on the device
▶ Press the button (cooling), the
button (auto mode) or the
The green operation lamp K lights up.
▶ Press the Temp. button to set the desired temperature.
– In cooling/heating/auto mode the temperature range is 16-30°C.
– In automatic mode, the device automatically switches between
heating and cooling mode to maintain the desired temperature.
– In Dry mode, the room temperature can be adjusted by a
temperature differential of up to ±2 °C.
Examples for drying mode:
1°C higher
2°C lower
Table 7
If the outside temperature is very low, the heating capacity of the air
conditioning system may not be sufficient. We recommend connecting
additional heat sources.
Set fan speed
▶ Press the Fan button to set the desired fan speed.
1 2
[1] Auto
[2] Quiet
[3] Soft
[4] Low
[5] High
Operation
button (heating), the Auto
Dry button (drying mode).
3 4 5
0010035985-001
15