4 Unscrew the blower cover clamping screws.
(Four PTT screws 4 x 14, indicated by )
Assembly precaution
Tighten the screws in a crisscross pattern.
5 Remove the cord bush.
6 Remove the blower stopper.
7 Remove the blower (assembly).
Assembly precaution
Set the blower (assembly) horizontally.
Assembly precaution
When installing the blower stopper, make sure that it is not loose.
When reassembling
Reassemble the unit in the reverse order of disassembly.
After reassembly, always make a test run to make sure that the unit
operates properly.
─ 21 ─
Blower cover
Cord bush
Blower (assembly)
Blower stopper
Blower stopper