NEC Promise SuperTrak EX8350 User Manual page 29

13.
Fill the replacement date (year and month) on the battery label coming with the battery pack. Then
put the label on the PCI bracket. The old label may be either peeled off or left. If left, put the new
label on the old one.
14.
Connect the battery connector of the BBU to that of the disk array controller with battery cable.
NOTE:
The BBU has two battery cable connectors. Either of two connectors may be
used. Select either connector appropriate to your system environment (e.g., location to
install in the server and cable routing condition) to connect the battery cable.
15.
Install the BBU and the disk array controller to the PCI slot of the server as before and fix it with the
screw.
Screws
Set up Date
Y .M
BBU
Battery cable
Fill the year and month.
2006 5
． M
Example) Y
Disk array controller
25