Removing A Hard Drive Carrier From A Hard Drive Bay; Installing A Hard Drive Into A Hard Drive Carrier - Bosch DIP-7280-00N Installation Manual

36 en | Maintenance
9.4.1

Removing a hard drive carrier from a hard drive bay

To remove a hard drive carrier from a hard drive bay:
1.
2.
Notice!
i
Except for short periods of time (swapping hard drives), do not operate the unit with the
hard drives removed from the bays.
9.4.2

Installing a hard drive into a hard drive carrier

To install a hard drive into a hard drive carrier:
1.
2.
2021.03 | V2 | DOC
Press the release button to the right of the hard drive carrier. This extends the hard drive
carrier handle.
Use the handle to pull the hard drive carrier out of the chassis.
1 Release button
Remove the screws which secure the dummy drive to the hard drive carrier.
Remove the dummy drive from the hard drive carrier and place the hard drive carrier on a
flat surface.
2
Installation manual
DIVAR IP all-in-one 7000 2U
Hard drive carrier handle
Bosch Security Systems B.V.