Removing A Hard Drive Carrier From A Hard Drive Bay; Installing A Hard Drive Into A Hard Drive Carrier - Bosch DIVAR IP all-in-one 7000 3U Installation Manual

36 en | Maintenance
Procedure
To install a hard drive, you have to perform following steps:
1.
2.
3.
9.4.1

Removing a hard drive carrier from a hard drive bay

To remove a hard drive carrier from a hard drive bay:
1.
2.
2
Notice!
Except for short periods of time (swapping hard drives), do not operate the unit with the
hard drives removed from the bays.
9.4.2

Installing a hard drive into a hard drive carrier

To install a hard drive into a hard drive carrier:
1.
2020.04 | V1.1 | DOC
Removing a hard drive carrier from a hard drive bay, page 36 .
Installing a hard drive into a hard drive carrier, page 36 .
Installing a hard drive carrier into a front drive bay, page 38 .
Press the release button to the right of the hard drive carrier. This extends the hard drive
carrier handle.
Use the handle to pull the hard drive carrier out of the chassis.
1
1 Release button
Remove the screws which secure the dummy drive to the hard drive carrier.
2
Installation manual
DIVAR IP all-in-one 7000 (3U)
Hard drive carrier handle
Bosch Security Systems B.V.