Panasonic SH-FX60 Operating Instructions page 4

Safety precautions
Placement
Set the unit up on an even surface away from direct sunlight, high
temperatures, high humidity, and excessive vibration. These conditions can
damage the cabinet and other components, thereby shortening the unit's
service life.
Do not place heavy items on the unit.
Voltage
Do not use high voltage power sources. This can overload the unit and
cause a fire.
Do not use a DC power source. Check the source carefully when setting the
unit up on a ship or other places where DC is used.
AC mains lead protection
Ensure the AC mains lead is connected correctly and not damaged. Poor
connection and lead damage can cause fire or electric shock. Do not pull,
bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC mains lead
can cause electric shock.
Do not handle the plug with wet hands. This can cause electric shock.
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt
about some of the check points, or if the solutions indicated in the table do not
solve the problem, consult your dealer for instructions.
On your home theater unit
≥There is no link between the home theater unit and the
The wireless
link indicator wireless system. Check that the wireless system is
(e.g. " [W] "
connected to the mains socket.
or LED) is
flashing.
≥Check that the home theater unit is turned on, and the
The wireless
link indicator wireless system is connected to the mains socket.
(e.g. " [W] " ≥Ensure that the digital transceiver is fully inserted into the
or LED) does slot of the home theater unit.
not light.
Maintenance
Clean this unit with a soft, dry cloth.
≥Never use alcohol, paint thinner or benzine to clean this unit.
≥Before using chemically treated cloth, carefully read the instructions that
came with the cloth.
Foreign matter
Do not let metal objects fall inside the unit. This can cause electric shock or
malfunction.
Do not let liquids get into the unit. This can cause electric shock or
malfunction. If this occurs, immediately disconnect the unit from the power
supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain flammable
gases which can ignite if sprayed into the unit.
Service
Do not attempt to repair this unit by yourself. If sound is interrupted,
indicators fail to light, smoke appears, or any other problem that is not
covered in these instructions occurs, disconnect the AC mains lead and
contact your dealer or an authorized service center. Electric shock or damage
to the unit can occur if the unit is repaired, disassembled or reconstructed by
unqualified persons.
Extend operating life by disconnecting the unit from the power source if it is
not to be used for a long time.
- If you see this symbol-
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local
authorities or dealer and ask for the correct method of disposal.
Specifications
RF SECTION
Wireless module
Frequency range
No. of channels
RF output power
AMPLIFIER SECTION
Output power
RMS output power: Dolby Digital Mode
Surround Ch
Total RMS Dolby Digital mode power
DIN output power stereo mode
Surround Ch (both ch driven)
Total DIN stereo mode power
NAME PLATE IMPEDANCE INDICATION:
GENERAL
Power supply
Power consumption
Dimensions (WtHtD)
Mass
Operating temperature range
Operating humidity range
Power consumption in standby mode
[Note]
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by a digital spectrum analyzer.
2.403 to 2.425 GHz
14 dBm (Max)
110 W per channel (3 ≠), 1 kHz, 10 % THD
50 W per channel (3 ≠), 1 kHz, 1 % THD
AC 230 to 240 V, 50 Hz
SH-FX80T
SE-FX60
SH-FX80T 97 mmk47.5 mmk8.5 mm
SE-FX60 89 mmk189 mmk180 mm
SH-FX80T
SE-FX60
r5 oC to r35 oC
5 % to 90 % RH (no condensation)
23
180 W
100 W
3 to 6 ≠
0.85 W
30 W
0.03 kg
0.7 kg
4 W