ATA Voice Field Reference
PSTN Line page (SPA3102)
ATA Administration Guide
VoIP User 1/2/3/4/
5/6/7/8 DP
VoIP User 1/2/3/4/
5/6/7/8 Password
Voice tab > PSTN Line page >
Ring Settings section
Default Ring
Voice tab > PSTN Line page >
FXO (PSTN) Timer Values (sec) section
VoIP Answer Delay Delay in seconds before auto-answering inbound VoIP calls
PSTN Answer
Delay
VoIP PIN Digit
Timeout
PSTN PIN Digit
Timeout
Index of the dial plan in the dial plan pool to be used with
VoIP User 1.
The default is 1.
The password to be used with VoIP User 1. The user
assumes the identity of VoIP User 1 must therefore
compute the credentials using this password, or the INVITE
will be challenged with a 401 response
The default is blank.
1-8, Follow Line Cfg
for the FXO account. The range is 0-255.
The default is 3.
Delay in seconds before auto-answering inbound PSTN
calls after the PSTN starts ringing. The range is 0-255.
The default is 16.
Timeout to wait for the 1
VoIP caller. The range is 0-255.
The default is 10.
Timeout to wait for the 1
PSTN caller. The range is 0-255.
The default is 10.
st
or subsequent PIN digits from a
st
or subsequent PIN digits from a
B
205