Section 6
LHMI overview
Commands
Table 8:
Name
Menu
R/L
Clear
Help
Multipage
Function buttons
Table 9:
Name
Function
button
6.1.2
Display
The LHMI includes a graphical monochrome liquid crystal display (LCD) with a resolution of 320 x
240 pixels. The character size can vary. The amount of characters and rows fitting the view depends
on the character size and the view that is shown.
The display view is divided into four basic areas.
26
Command push-buttons
Function buttons
Description
Executing the defined function: OFF, menu short cut or binary control.
© 2018 - 2023 Hitachi Energy. All rights reserved.
Description
•
Moving directly to Main menu, if currently in
any other menu or view.
•
Moving to the default view, if currently in Main
menu.
Changing the control position (remote or local) of
the device.
•
When the R LED is lit, remote control is
enabled and local control disabled.
•
When the L LED is lit, local control is enabled
and remote control disabled.
•
When none of the LEDs are lit, both control
positions are disabled.
•
Activating the Clear/Reset view.
Showing the help menu.
Opening alarm panel and selecting alarm page from
the view.
GUID-55739D4F-1DA5-4112-B5C7-217AAF360EA5 v13
1MRK500129-UEN Rev. J
670/650 series
Quick start guide