Table of Contents
Advertisement
USING THE PROJECTOR
Display 3D menu
otee:
‡
This projector is a 3D ready projector with DLP-Link 3D solution.
‡
Please make sure your 3D glasses are use for DLP-Link 3D before enjoy your video.
‡
This projector supports frame sequential (page-flip) 3D via HDMI/VGA ports.
‡
To enable 3D mode, the input frame rate should be set to 60Hz only, lower or higher frame rate is not
supported.
‡
To reach the best performance, resolution 1920x1080 is recommended, please be noted that 4K
(3840x2160) resolution is not supported in 3D mode.
3D Mode
Use this option to disable the 3D function or select the appropriate the 3D function.
Off: Select "Off" to turn off 3D mode.
‡
‡
One: Select "On" to turn on 3D mode.
otee:
If the 2D and 3D sources enter projector at the same time, if the ghosting image appears in the 2D source,
make sure to manually turn off the 3D function.
3D Format
Use this option to select the appropriate 3D format content.
‡
Auto: When a 3D identification signal is detected, the 3D format is selected automatically.
‡
SBS: Display 3D signal in "Side-by-Side" format.
‡
Top and Bottom: Display 3D signal in "Top and Bottom" format.
‡
Frame Sequential: Display 3D signal in "Frame Sequential" format.
3D Sync Invert
Use this option to enable/disable the 3D sync invert function.
Display aspect ratio menu
Aspect Ratio
Select the aspect ratio of the displayed image between the following options:
‡
4e:3: This format is for 4:3 input sources.
‡
16e:9: This format is for 16:9 input sources, like HDTV and DVD enhanced for Wide screen TV.
‡
LBX: This format is for non-16x9, letterbox source and if you use external 16x9 lens to display 2.35:1
aspect ratio in full resolution.
otee:
‡
Detailed informations about LBX mode:
±
Some Letter-Box Format DVDs are not enhanced for 16x9 TVs. In this situation, the image
will not look right when displaying image in 16:9 mode. In this situation, please try to use the
4:3 mode to view the DVD. If the content is not 4:3, there will be black bars around the image
in 16:9 display. For this type of content, you can use LBX mode to fill the image on the 16:9
display.
±
If you use an external anamorphic lens, this LBX mode also allows you to watch a 2.35:1
content (include Anamorphic DVD and HDTV film source) that supports anamorphic wide is
enhanced for 16x9 Display in a wide 2.35:1 image. In this case, there are no black bars. Light
source power and vertical resolution are fully utilized.
30
English
This manual downloaded from http://www.manualowl.com
Advertisement
Table of Contents
