Intercom Paging (Apt/Dpt Integration Only); Interview Service - Panasonic KX-TVA50 Feature Manual

2.2.26 Interview Service

Conditions
•
Holidays cannot overlap.
Programming Manual References
2.4.2 Holiday Settings

2.2.25 Intercom Paging (APT/DPT Integration Only)

Description
Allows callers to page subscribers by PBX paging (there are different kinds of PBX paging, and these can be
specified by VPS programming) when the subscribers have set Intercom Paging for Call Transfer or when the
subscribers have set Intercom Paging for Incomplete Call Handling. The caller is briefly placed on hold while
the VPS announces the page and until the subscriber answers the page. The subscriber can answer the page
from any extension using the paging answer code; this code is specified in the PBX User Manual. If Caller ID
information is received and the caller's name has been recorded for the Caller Name Announcement feature,
the name will be announced at the end of the page.
Conditions
•
If the same telephone number is programmed for both the system and personal caller name announcement,
the VPS will announce the personal caller name.
•
To utilize this feature, the following settings are necessary.
1.
Assign an Intercom Paging Group to the desired Class of Service (see "Intercom Paging Group" in
2.2.1 Class of Service in the Programming Manual). If set to "All", all Intercom Paging Groups are
assigned to the COS.
2.
Set "No Answer Time for Intercom Paging" to the desired setting (see "No Answer Time for Intercom
Paging" in 2.5.4.5 PBX Parameters in the Programming Manual).
3.
If necessary, change the Paging Code of the Intercom Paging Group you selected in step 1 (see
"Paging Code" in 2.5.4.5 PBX Parameters in the Programming Manual). You can also set all Intercom
Paging Groups to the same Paging Code ("Paging Code for All Groups").
Programming Manual References
"Intercom Paging Group" in 2.2.1 Class of Service
2.5.4.9 Intercom Paging Parameters
2.2.26 Interview Service
Description
Allows the VPS to "interview" a caller by playing a series of prerecorded questions and recording the caller's
responses.
As the callers answers questions, they are recorded into an interview mailbox.
–
After a caller records the answers, the interview mailbox lights a message waiting lamp on the interview
mailbox owner's extension.
–
When retrieving the messages, the subscriber only hears the answers to the questions.
In order to use Interview service, at least one interview mailbox must be created in the VPS (see 2.1.3 Mailbox
Parameters in the Programming Manual).
24 Feature Manual Document Version 3.0 2010/06