Table of Contents
Advertisement
Settings
Language
The display can be set to appear in one
of several different languages.
You can change the language used in
the display and also the country via the
Language
sub-menu.
The flag after the word
serves as a guide if a language that
you do not understand has been set.
In this case keep selecting the menu
option that has a flag after it until you
reach the
Language
Time of day
The current time of day must be set be-
fore you can use the timer option.
Setting the clock format
You can select either a 24-hour or 12-
hour clock.
Select the
Clock format
Select the setting you want and con-
firm with OK.
Setting the time
You can set the current time of day.
Select the
Set
menu option.
Use the sensor buttons to enter
the hour and confirm your entry by
touching OK.
Then set the minutes and confirm
with OK.
The time of day has now been saved.
100
Language
sub-menu.
menu option.
Water hardness
Your dishwasher is fitted with a water
softener.
- The dishwasher must be pro-
grammed to the correct water hard-
ness for your area.
- Your local water authority will be able
to advise you of the water hardness
level in your area.
- Where the water hardness fluctuates,
e.g., between 10-16 gpg (10–15 °dH),
always program the dishwasher to
the higher value (16 gpg (15 °dH) in
this example).
If the water hardness in your area is
available in a unit other than °dH, you
can convert the values as follows:
1 °dH = 1.04 gpg = 0.18 mmol/l =
1.78 °fH
°d
gr/gal
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
°fH
Display
2
1
4
2
5
3
7
4
9
5
11
6
13
7
14
8
16
9
18
10
Advertisement
Table of Contents
