Remote Control - Miele G 7311 Operating Instructions Manual

Reset
This menu option only appears if you
have already connected your dish-
washer to your WiFi network.
You can use this menu option to reset
all WiFi module settings to the factory
default settings.
The network configuration should be re-
set whenever a dishwasher is being dis-
posed of or sold, or if a used dish-
washer is being put into operation. This
is the only way to ensure that all per-
sonal data has been removed and the
previous owner will no longer be able to
access the dishwasher.
 Select the
Reset
confirm with OK.
menu option and

Remote control

This menu option will only be dis-
played if you have connected your
dishwasher to your WiFi network (see
"Miele@home" under "Settings").
If you wish to permanently turn off the
Remote control option, you can do this
under this menu option. The  sensor
button will then no longer be available
to select until you change this setting
again.
Even if the Remote control
turned off, you can use Miele@mobile to
call up information about your appli-
ance. However, you cannot start any
programs or change any settings from
it.
Settings
option is
105