Using Your Sear Burner - KitchenAid 1902486 Installation Instructions And Use & Care Manual

Lighting the Sear Burner
1. Open the sear burner cover. Do not light burners with the
cover on.
2. Do not lean over the grill.
Push in and turn the grill control knob to "●", while
3.
continuing to hold it in.
IMPORTANT: If burner does not light immediately, turn the
burner knob to " ○ " and wait 5 minutes before relighting.
Manually Lighting the Sear Burner
1. Open the hood completely. Do not light burners with the
hood closed.
2. Do not lean over the grill.
3. Remove the manual lighting extension (see the following
illustration) and attach a match to the split ring.
4. Strike the match to light it.
5. Hold the lit match close to the sear burner.

Using Your Sear Burner

Push in and turn the control knob to "●". For the burner
6.
closest to the lit match. The burner will light immediately.
When burner is lit. turn knob to desired setting.
IMPORTANT:
If burner does not light immediately, turn the burner knob to " ○ "
and wait 5 minutes before relighting.
If any burners do not light after attempting to light them
manually, contact the Customer Service Center. See the
''Assistance'' section.
39