Configuration2 Menu - Asus SA555-Y User Manual

6.2.6. Configuration2 menu

  
 

 
 
 
 
 

 
 
 
 
 
 



 
 
OSD turn off
Set the period of time the OSD (on-screen display) menu stays on the
screen.
The options are: {0 ~ 120} seconds.
*{0} does not disappear automatically.
OSD H-position
Adjust the horizontal position of the OSD menu.
OSD V-position
Adjust the vertical position of the OSD menu.
OSD Transparency
Adjust OSD transparency.
• {Off} - Transparency off.
• {1-100} - Transparency level 1-100.
Information OSD
Set the period of time the information OSD is displayed on the upper
right corner of the screen. The information OSD will display when input
signal is changed.
The information OSD will remain on the screen with {Off} selection.
The options are: {Off, 1 ~ 60} seconds.
Logo
Choose to enable or disable the picture of Logo when turn on your
display.
The options are:
{Off} (Default)
{User}**
** If Logo set to USER.
User logo does NOT support rotation function.




 









39
Monitor ID
Set the ID number for controlling the display via the RS232C
connection. Each display must have a unique ID number when multiple
sets of this display are connected. Monitor ID number range is between
1 to 255.
Heat status
This function allows you to check the thermal status of the display at
any time.
A temperature-warning message will be shown on the screen if the
temperature reaches 97°C(207°F). All key functions except
will then be disabled.
Once the temperature reaches 98°C(208°F), the display power will be
shut down automatically.
Monitor information
Shows information about your display, including model number,
operating hours and software version.
 
 
 
 
 
DP Version
DisplayPort support mode.
The options are:
{DP 1.1} (Default) : DP 1.1 single stream(clone mode)
{DP 1.2 SST}: DP 1.2 Single stream(clone mode)
{DP 1.2 MST}: DP 1.2 Multi-Stream
*NOTE:
The DP version must be set the same for all daisy chain displays.
Window selection
Select the window for adjusting setting. The selected window will be
highlight green border.
Window selection will set to Main after power on.
The options are:
• {Main}(Default), {PIP }
[ ]
• Hot key for Window selection function.
Rotation
Set the rotation of Main/Sub/OSD
Auto Rotate : Off/On
OSD Rotate : Landscape/Portrait
Image Rotate:
All : Off/On
Main : Off/On
Sub : Off/On
Auto Rotate: {Off}, {On} when value is On,automatically detect whether
the PD rotation, Off is set by OSD.
OSD Rotate: {Off}, {On} when value is on, OSD rotate 90 °, Off is
restored.
All: {Off}, {On} when value is on, all Window screen rotate 90 °, Off the
reference set individual window.
SA495-Y/SA555-Y
[ ]
key



Default : Off
Default : Landscape
Default : Off
Default : Off
Default : Off