Table of Contents
Advertisement
SA495-Y/SA555-Y
critical moment in time (eg march 29, 2009, 02.00 o'clock: time will be
set 1 hour later or October 25, 2009, 02.00 o'clock: time will be set 1
hour earlier).
Schedule
This function allows you to program up to 7 (seven) different scheduled
time intervals for the display to activate.
You can select:
• The time for the display to turn on and turn off.
• The days in a week for the display to activate.
• Which input source the display will use for each scheduled
activation period.
NOTE: W e recommend you to set up current date and time in the
{Date and time} menu before using this function.
1. Press [OK] or [ ] button to enter the submenu.
＿
＿
playlist
2. Press [ ] or [ ] button to select a schedule item (item number 1 ~ 7),
and then press [OK] button to mark it the item number.
＿
＿
playlist
3. Press [ ] or [ ] button to select the schedule:
P ower-on schedule: Press [ ] or [ ] button to set the hour
1
and minute for the display to turn on.
Power-off schedule: Press [ ] or [ ] button to set the hour
2
and minute for the display to turn off.
Select or leave an empty "__" for both the hour and minute slot if
you do not want to use this power-on or power-off schedule.
Input-source selection: Press [ ] or [ ] button to select an
3
input source. If no input source is selected, the input source
will remain the same as last selected.
Date schedule: Press [ ] button to select which day in a
4
week this schedule item will be take effect, and then press the
[OK] button.
When Input-source select to USB, enable to access playlist
5
setting:
4. For additional schedule settings, press [
above. A check mark in the box next to the number of the schedule
item indicates that the selected schedule is in effect.
＿
＿
＿
0
1
2
3
＿
＿
＿
4
5
0
], then repeat the steps
NOTES:
• If the schedules overlap, the scheduled power-on time takes priority
over scheduled power-off time.
• If there are two schedule items programmed for the same time, the
highest numbered schedule takes priority. For example, if schedule
items #1 and #2 both set the display to power on at 7:00 AM and
off at 5:00 PM, then only schedule item # 2 will take effect.
HDMI with One Wire
CEC control.
• {Off} - Disable CEC.(Default)
• {On} - Enable CEC.
Auto signal detection
Choose to let the display detect and display available signal sources
automatically.
• {Off} - Once a signal is connected, it can only be selected manually.
If the selected input is no signal, set the display to display the image
automatically according to the search order of each option.
• {All}: DP -> HDMI1 -> HDMI2 -> DVI -> Media Player -> Browser
-> PDF Reader -> Custom.
Power Save
Power save modes
Mode 1: DC off -> Power off. LED: Red.
Power Save -> Power off, LED: Red
Mode 2: DC off -> Power off, LED: Red.
Power Save -> Power Saving. LED: Orange. Can be wake up.
Mode 3: DC off -> Back light off, LED: Red
Power Save -> Back light off, LED: Orange. Can be wake up.
Mode 4: DC off -> Back light off, LED: Red
Power Save -> Will not enter power save mode. show "no signal" only.
Note: When Auto FW update is not off, display will work under Mode3
for FW update, but OSD item will not change.
Mode 3
DC OFF:
Backlight Off only
Power Save:
Backlight Ooff only
Mode 4
DC OFF:
Backlight Off only
Power Save:
No signal(Backlight On)
Following table is the action for Android board with different power
mode.
DC off/on : press power button by RC
Power mode
Mode 1/2
in OSD
42
Mode 1(default)
DC OFF:
Power Off
Power Save:
Power Off
Mode 2
DC OFF:
Power Off
Power Save:
Power Saving
Mode 3/4
Advertisement
Table of Contents
Troubleshooting
