Safety And Compliance Guidelines; Safety Symbols Used In This Manual; Qualification Of Personnel; Personal Protection - NEC LED-FA031i2 Safety Manual

1

SAFETY AND COMPLIANCE GUIDELINES

Read the instruction manuals carefully and follow the given instructions and safety
•
information thoroughly.
• The operating safety of the system is only ensured through its proper use.
Only operate the system with supplied accessories and tools.
•

1.1 Safety Symbols Used in this Manual

Safety instructions emphasize potential hazards for personal injury or property damage. This
manual uses the following safety notices to indicate the severity of a potential hazard:
WARNING!
A warning for a potentially hazardous situation that can result in death,
personal injury, or property damage if not adhered to.
Caution!
A recommendation for a potentially hazardous situation that may result in
personal injury or property damage if not adhered to.
Notice
A recommendation for a potentially hazardous situation that may result in property damage if
not adhered to.

1.2 Qualification of Personnel

Only authorized and qualified technical personnel can perform the installation. Before the
installation, the installation technician must be convinced of the completeness of the scope of
supply including the required accessories. The technician may only use the prescribed network
cables, please see the cabling in this manual.
There must be a security officer who is responsible for the security at diverse tasks during the
installation.
Only personal qualified by Sharp NEC DISPLAY SOLUTIONS and/or respectively authorized
personal may carry out repairs, service and maintenance work on the system. A case of
service occurs as soon as one component is damaged in any way, is not fully functional any
more.
Only trained personnel, such as electricians or NEC personnel, may connect the internal power
supply to mains power supply.

1.3 Personal Protection

WARNING!
Electric shock hazards.
Follow the relevant legal electric requirements of the country, where the system
will be mounted, installed and operated, as well as the existing regulations of
the operator, such as work, operating and safety regulations.
3