Advertisement
17. Scalding may occur if the lid is removed during the heating cycle.
SAVE THESE INSTRUCTIONS
SPECIAL CORD SET INSTRUCTIONS
1. A short power supply cord is provided to reduce the hazards resulting from
becoming entangled in or tripping over a longer cord.
2. An extension cord may be purchased and used if care is exercised in its use.
PRECAUTIONS:
WARNING: TO AVOID SCALDING, handle this kettle with care as water is heating,
boiling, and cooling. The lid must remain in place during use to avoid steam burns.
Keep spout away from persons as scalding can result from steam.
1. Place the electric kettle well back from the edge of the counter.
2. This kettle is intended for boiling WATER ONLY. Do not heat any other liquid
or attempt to cook any food in this appliance.
3. NEVER place the kettle NEAR HOT SURFACES.
4. NO PARTS ARE DISHWASHER SAFE.
5. Do not exceed the "Max" water level mark when filling. Overfilling could cause
hot water to boil out of the spout.
6. Do not hold the switch on as this may damage the auto shut-off mechanism.
7. Carry or move electric kettle by handle only.
8. Kettle body may get very hot, be careful when handling.
9. Do not immerse the kettle or power base in water or any other liquid.
Clean your electric kettle before first use
1. Wash the inside of the kettle and lid with mild detergent and water. Rinse each
thoroughly. Do not immerse the kettle or power base in water or any other liquid.
These items are not dishwasher safe.
2. Fill the electric kettle with fresh water to the "MAX" water level mark. Plug power
base into power outlet. Place kettle into power base. Turn the switch ON by
pressing down on ON/OFF switch. ON/OFF light will turn on indicating kettle is ON.
Advertisement
