Operation Indicator - Hitachi ATW-TAG-01 Installation And Operation Manual

4.4 Programming
The "Prog" button allows you to cancel the radio configuration and open the product in pairing mode.
The "Prog" indicator allows us to find out the status of the product's radio configuration.
"Prog" Button
Momentary pressure
Long pressure (> 7 Seconds)
Short pressure (> 3 Seconds)
"Prog" indicator
On
Off
Flashing
To configure the unit's operating mode remotely, consult the heat pump's installation manual.

5. Operation indicator

The Link LED allows you to see the operation of the link to the heat pump. A slight fluttering indicates
successful communication with the heat pump.
6. Recycling and declaration of conformity
The product is to be treated as waste subject to directive 2002/96/EC of 27 January
2003, on waste electrical and electronic equipment. It must therefore not be disposed
of with unsorted municipal waste, but rather taken to recycling centers or pick-up and
collection systems made available to you by local collectives.
Hitachi Air Conditioning Products Europe, S.A.U. declares that the device conforms to the essential
demands and to the other relevant provisions of directive 1999/5/EC.
7. Contact
Hitachi Air Conditioning Products Europe, S.A.U.
Ronda Shimizu, 1 – Polig. Ind. Can Torrella
08233 Vacarisses (Barcelona) Spain.
5
PMML0361A rev.0 - 03/2015
Exit configuration mode
Cancel radio configuration
Opening of radio pairing mode
The product does not have a radio configuration
The product has a radio configuration
The product is open in pairing mode