8
Configuration of the network node (step 2)
•
Under "DICOM", click <Network Nodes>.
Select "define new" under "Select Host".
•
Enter the Host Name of the Navigation system under "Host Properties". Note: "naviga-
tionsys" in the figure below is only an example.
•
Ensure that the Navigation system is connected and ready.
•
Click "Find" to check whether the host is alive and ensure that the TCP/IP address of
the Navigation system appears in the address field.
•
Click <Save>.
•
Click ">".
Fig. 3:
ARCADIS
Configuration 2
SPR2-310.814.02.02.02
04.04
Installation and Settings
Page 8 of 12
CS SD 24
0
Siemens AG
Medical Solutions