Table of Contents
Advertisement
Installation and Settings
Configuration of the network node (step 3)
•
Select "define new" under "General Node Properties" to edit the logical name
"NAV2D_XXX" (XXX = logical name of Navigation system).
NOTE
•
Edit the DICOM AE Title of the Navigation system under "Application Entity Proper-
ties". "Note: "NAVISYSTEM" in the figure below is only an example.
•
Under Port Number, edit "104" if necessary. If port no. 104 does not work, check if the
Navigation system uses e.g. port 105.
•
Click <Add>.
•
Click <Verification> to check if the "AE Title" is alive.
•
Select <Storage> under "Supported DICOM services".
•
Click <Save>.
Fig. 4:
Siemens AG
Medical Solutions
If the ARCADIS system is also connected to a 3D Navigation sys-
tem, the logical name should be "NAV3D_XXX" (XXX = logical
name of Navigation system).
Configuration 3
SPR2-310.814.02.02.02
04.04
Page 9 of 12
CS SD 24
9
0
ARCADIS
Advertisement
Table of Contents
