Cpu Fan - Lenovo 22ADA6 Hardware Maintenance Manual

8. Remove the memory module.
9. Install the new memory module.
10. Reinstall the removed parts in reverse order of the removal steps mentioned above.
11. Reconnect all disconnected cables to the computer and reconnect the power cord to the electrical
outlet.

CPU fan

Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
Replacement procedure
1. Turn off the computer and remove all connected devices and cables.
2. Remove the computer stand cover. See "Computer stand cover" on page 59.
3. Remove the computer stand. See "Computer stand" on page 60.
4. Remove the optical drive. See "Optical drive" on page 61.
5. Remove the computer cover. See "Computer cover" on page 64.
6. Remove the system board frame. See "System board frame" on page 71.
7. Remove three screws. Disconnect the CPU fan connector from the system board, then remove the CPU
fan.
8. Install the new CPU fan.
76
IdeaCentre AIO 3 Hardware Maintenance Manual