Installing The Fixing Unit - Canon ImageRUNNER 1022iF Service Manual

Chapter 8
7) Release the hook, remove the fixing gear retainer [1], and then remove the
fixing gear [2].
8) Apply marking [1], remove 1 screw [2], and detach the positioning pin [3].
8-6
[2]
[1]
F-8-8
[2]
[1]
[1]
F-8-9
F-8-10
9) Apply marking [1], remove 4 screws [2], and detach the fixing unit [3].
[2]
[3]
F-8-11
To install the fixing unit, follow "Installing the fixing unit".

8.4.1.2 Installing the Fixing unit

/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
Follow the procedure described below when installing the fixing unit.
1) Install the fixing unit without tightening the screws.
2) Install the positioning pin [2] to align with marking [1] at the left door, and
then fix it with 4 screws at the front and back of the left door. When
installing a new fixing unit, install the positioning pin to align with
reference mark [3].
[3]
[2]
[1]
[1]
[2]
0013-1241