Philips EasyKey 6000 Series User Manual page 8

Adjustable rear lever instructions
Loosen the screw and rotate
1
the lever 180 degrees to the
right position.
Attention
1. Choose a proper installation kit based on the door thickness. The default tool kit
applies to a door thickness of 35-60mm. Please consult the local distributor for other
door thicknesses.
2. If the length of the square shaft is too long, please cut it to a proper length according
to the door thickness.
Step 3| Adjustable latch instructions
Adjust the latch direction to adapt to the door swing direction: if the slant of the
latch is towards the outside door, then the door is inswing; if the slant of the latch
is towards the inside door, then the door is outswing.
Push the latch in
2
and rotate it to
180 degrees
3
6
Release the latch
and let it rebound
Secure the screw.
2
1 Pull the lock-out
bolt bar upward