Replacing The I/O Board; Procedure; Post-Requisites - Dell Inspiron 15 5000 Service Manual

Replacing the I/O board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Using the alignment posts, place the I/O board on the palm rest and keyboard
assembly.
2 Replace the screw(s) (M2x4) that secure the I/O board to the palm rest and
keyboard assembly.
3 Adhere the I/O-board cable to the palm rest and keyboard assembly.
4 Connect the I/O-board cable to the system board and close the latch to secure
the cable.
5 Connect the coin-cell battery cable to the I/O board (Applicable only for
computers shipped without optical drive).

Post-requisites

1 Replace the hard
2 Replace the battery.
3 Replace the base
4 Replace the optical drive
84
computer. After working inside your computer, follow
After working inside your
drive.
cover.
(optional).
computer. For more safety best
www.dell.com/
Before