Replacing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Connect the camera cable to the camera module.
2
Using the alignment post adhere the camera module on the display back-cover
and antenna assembly.
Post-requisites
1
Replace the
display
2
Replace the
display
3
Replace the
wireless
4
Replace the
base
5
Replace the
optical drive
computer. After working inside your computer, follow
After working inside your
bezel.
assembly.
card.
cover.
(optional).
computer. For more safety best
www.dell.com/
Before
107