Replacing The Camera; Procedure; Post-Requisites - Dell Inspiron 13-7375 Service Manual

Replacing the camera

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Connect the camera cable to the camera module.
2 Adhere the tape that secures the camera cable to the camera module.
3 Using the alignment post place the camera module on the display panel and snap
it into place.

Post-requisites

1 Follow the procedure from step 4 to step 6 in
2 Replace the display
3 Replace the battery.
4 Replace the base
computer. After working inside your computer, follow
After working inside your
assembly.
cover.
computer. For more safety best
www.dell.com/
"Replacing the display
Before
panel".
95