Replacing The Display Assembly; Procedure; Post-Requisites - Dell Inspiron 13-7375 Service Manual

Replacing the display assembly

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

CAUTION: Place the computer on a soft and clean surface to avoid
scratching the display.
1 Place the display assembly face down on the palm-rest assembly.
2 Align the screw holes on the display hinges with the screw holes on the palm-
rest assembly.
3 Replace the four screws (M2.5x2.5 Big Head) that secure the display assembly
to the palm-rest assembly.
4 Close the display and turn the computer over.
5 Slide the display cable and the touch-screen board-cable into their respective
connectors on the system board and close the latches to secure the cables.
6 Adhere the pieces of tape that secure the display cable and the touch-screen
board-cable to their respective connectors on the system board.

Post-requisites

1 Replace the wireless
2 Replace the battery.
3 Replace the base
68
computer. After working inside your computer, follow
After working inside your
card.
cover.
computer. For more safety best
www.dell.com/
Before