Replacing The Display Cable; Procedure; Post-Requisites - Dell Inspiron 13-7375 Service Manual

Replacing the display cable

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Route the display cable through the routing guides on the display panel.
2 Slide the display cable into the connector and press down the latch to secure the
cable.
3 Slide the sensor-board cable into the connector on the sensor board and press
down the latch to secure the cable.
4 Adhere the sensor-board cable tape.
5 Adhere the tape that secures the display cable to the display panel.

Post-requisites

1 Follow the procedure from step 4 to step 6 in
2 Replace the display
3 Replace the camera.
4 Replace the battery.
5 Replace the base
98
computer. After working inside your computer, follow
After working inside your
assembly.
cover.
computer. For more safety best
www.dell.com/
"Replacing the display
Before
panel".