Lenovo 10HJ User Manual page 56

Figure 13. Removing the PCI Express card
Notes:
– The card fits tightly into the card slot. If necessary, alternate moving each side of the card a small
amount until it is removed from the card slot.
– If the card is held in place by a retaining latch, press the card retaining latch
disengage the latch. Grasp the card and gently pull it out of the slot.
5. Remove the new PCI Express card from its static-protective package.
6. Install the new card into the appropriate slot on the system board. See "Locating parts on the system
board" on page 12.
Note: If you are installing a PCI Express x16 graphics card, make sure the memory slot retaining clips
are closed before you install the graphics card.
44
ThinkCentre M73 User Guide
1 as shown to