Advertisement
Replacing the air filter unit (Continued)
4 ) Insert a new air filter unit (replacement air filter unit) in the projector.
There is no difference between the top and bottom of the air filter unit, but there is a
●
difference between the unit's front and back. Align the protrusions of the air filter unit with
the grooves in the projector.
Catch the frame of the air filter unit's air outlet side on the two tabs at the back of the
●
projector where the air filter unit is stowed, and proceed with the installation following the
instructions in step 3) in reverse.
Check that the air filter unit frame has latched onto the tabs where the air filter unit is
•
stowed in the projector.
Air filter unit
protrusion
Projector
groove
5 ) Install the air filter cover on the projector and use a Phillips screwdriver to
tighten the air filter cover fixing screw.
Insert the air filter cover by following the instructions for step 2) in the reverse order.
●
Attention
Be sure to install the air filter unit before turning on the projector. Using the projector without
●
the air filter unit will cause dirt and dust to accumulate inside the projector and could result in
malfunction.
When the projector is used without the air filter unit installed, a message is displayed for
•
about 30 seconds on the projection screen.
Dispose of the packaging materials properly after unpacking the product.
●
Note
The frequency with which the air filter unit needs to be changed depends significantly on the
●
environment where the unit is used.
For procedures on maintaining the air filter unit, refer to the operating instructions supplied with
●
the projector.
„ Disposal
When discarding this product, please contact your local authorities or dealer and ask for the
correct method of disposal.
Panasonic Connect Co., Ltd.
Web Site : https://panasonic.net/cns/projector/
© Panasonic Connect Co., Ltd. 2022
Projector tabs
Projector tabs
Air filter unit
protrusion
Projector
groove
SS0412AM2042 -PS
Printed in Japan
Advertisement
